Although it takes some time to sculpt complex images, the results are very impressive. Especially the pictures engraved by the dither method have very good effects, and all the details are visible. When we started cutting things, we started to see the limitations of this cheap Laser pointer. Obviously, the diode used in the laser is of poor quality, because even if it is focused as much as possible, it will not produce a dot, but a line. The visible part of the wire is about 1 mm long, but most of the power is concentrated in the center, which means the wire is not 1 mm wide, but it is not as thin as possible. Another major problem with dots is that when cutting in the Y direction, since the cutting is very narrow, it is very easy and fast to perform. However, in the X direction, the cut is much wider and needs to be much slower. This creates unequal cuts and makes cutting wood more difficult. All diode lasers have this problem to some extent, but it is more obvious in this mode.
When you buy a laser engraving machine, you need to consider the cost of accessories and accompaniment and the equipment itself. Before making a final decision, make sure you compare rates and specifications. Although the price of a laser engraver may be as low as $200, the price may also be as high as tens of thousands of dollars. In currency terms, the price range is as wide as the Pacific. Therefore, you must narrow down your choices wisely and choose the right laser engraving machine for yourself.
GCC's S400 is a medium distance machine with a maximum Z gap of 11 inches and a large working area. This model is known for its user-friendly touch screen interface, dust-proof technology and easy-to-maintain maintenance design.
Popular uses of S400 include 3D carving on wood, anodized aluminum decoration, and leather and metal customization.
In general, this machine is very suitable for carving wood within a budget. However, it must not be compared with real high-power diode lasers, such as Endurance's 10W model, which can easily cut plywood to 5 mm. But, of course, these high-power lasers also cost more money.
One of the most important technical specifications to look for in a blue laser pointer is the material it supports. Some engraving machines may work on plastic, while others may only work on metal.
In addition, you must also check the software compatibility in the device. Ideally, you must choose a machine that is compatible with your existing software or comes with software, so you don't have to buy a new machine. Before buying, you can also look for connection options in the engraving machine.