Most of the existing waterproof laser pointers for outdoor use adopt an integrally sealed waterproof structure, that is, the Laser pointer, control box, scanning galvanometer, reflector, heat sink and other parts are all sealed in the shell to achieve the purpose of waterproofing and avoid Scanning galvanometers, mirrors and other optical lenses are contaminated by dust. However, in order to ensure the heat dissipation effect of such an integrally sealed waterproof laser pointer, the heat needs to be transferred to another air-conditioned room through a heat dissipation pipe, which is troublesome to install and use. The upper surface of the side plate is fixedly installed with an upper cover, the two sides of the side plate are respectively fixedly installed with a front plate and a rear plate symmetrically, and a light source plate is fixedly installed between the inner walls of the two groups of side plates. A round cake is fixedly installed on the outer surface of the plate, a lifting lug is fixedly mounted on the side of the round cake away from the side plate, and a number of connecting bars is fixed and symmetrically fixed on the inner wall of the side plate. The utility model is provided with the structure, the structure is simple, so as to ensure that the entire waterproof laser light is small in size, light in weight, convenient in transportation, and can be carried with the vehicle. At the same time, under the action of the rain shield, the equipment can be effectively Waterproof, effectively avoiding the heavy, large and complicated high-power laser light, which makes it difficult to transport the laser light, and is more convenient for the staff to use.
A waterproof laser pointer, which includes a housing, optical lenses, precision control components, and heat sinks. The housing is divided into an upper accommodating area and a lower accommodating area through a thermally conductive partition. The top of the housing is provided with a waterproof cover and an optical lens. And the precision control components are sealed in the upper accommodating area, the upper accommodating area is provided with a light outlet, the heat sink is placed in the lower accommodating area, and the lower accommodating area is provided with a vent.