Level is a very common in our lives as tool, application is very extensive, and the development of The Times, the loss of time, the efficiency of every industry is requires, decoration and construction industry, in particular, accurate is particularly important, so its purely human factors need much less, tool will need to be more and more advanced. The Laser level (level) is an excellent measuring application equipped with green laser pointer, conventional 3 mode level/bubble level (libella) and inclinometer (dipmeter) for measuring vertical angles and determining accurate level. It's the perfect, convenient and precise bubble grade tool for every handyman.
Laser levels and construction tools are commonly used for a variety of purposes in construction and surveying. Laser levelling is designed to, you guessed it, make sure things are level, or level at a particular Angle or level. This could mean something as simple as hanging a painting in your home, or something more complex and influential, like laying roads to a specific grade or making sure the floors of buildings are flat. There are many types of laser level, including rotating laser and linear laser.
With the progress of science and technology, there are more and more instruments and equipment to help us work better, like some detection, measurement on Laser level can be used. Level instrument is a measuring tool that can be used in our life. Compared with the traditional measuring tool, it has a lot of advantages. Their own advantages. Laser level is a kind of intelligent display device instrument, next xiaobian for you to talk about the use of laser level Methods, types and five functions.
How to use laser level
1, first open the switch, (switch is on the side) laser level three line or five line. There should be an automatic calibration on the level Positive system (above the water beads correction, water beads in the circle can be. Uneven if it will automatically sound, after level
There was no sound.
2. When measuring, make the working surface of the level stick close to the measured surface, and read after the bubble is completely stationary.
3. The indexing value of the level meter is the tilt value of the base length of one meter. If the actual tilt of length L is to be measured, the following formula can be used
Line calculation: actual tilt value = indexing value *L* number of deviation grids
4. In order to avoid measuring error caused by inaccurate zero position of the level, the zero position of the level must be proofread before use Or adjustment.
