There is no single standard for defining military laser designators or systems. Different branches of the Air Force, Army, Coast Guard, Navy, Space Force, ATF, DEA, and police forces use lasers for a number of practical applications. Nor are we just talking about wartime or open conflict. Lasers are commonly used in military training exercises of all spectrum and powers outside theatre. We've seen how invisible or infrared laser beams can be used, but what about visible colors like green 532nm? The short answer is yes. Use visible colors such as green, red, blue, or even purple/purple. The most common visible colors are green and red for several key reasons. How much beam power is appropriate? What is the minimum power for this application? So, since geese usually appear during the day, you need lasers that are visible to them and yourself during the day. Usually, a minimum green of 200mW is a starting point and is just bright enough for daytime use. On a sunny day, anything below 200mW is diluted. However, the higher the power, the better. If your budget allows you to go above 500mW or 1000mW, you'll get a bigger impact on sunny days and over longer distances.
The best way to get the green laser pointer to play better and play less is to reward the cat with a snack or other physical cat toy immediately after the game. This gives it the satisfaction of hunting, even if it's not the laser itself. There is no single standard for defining military laser designators or systems. Different branches of the Air Force, Army, Coast Guard, Navy, Space Force, ATF, DEA, and police forces use lasers for a number of practical applications. Nor are we just talking about wartime or open conflict. Lasers are commonly used in military training exercises of all spectrum and powers outside theatre.
Lasers produce convergent beams of light at various frequencies. These range from the low end of the spectrum (ultraviolet) to visible colors that we perceive (such as green) and finally to the high end of the spectrum (infrared). Ultraviolet and infrared light are invisible to the human eye, so lasers at these wavelengths are not suitable for most everyday users. Visible light laser designators tend to range from 405nm (purple) to 650nm (red). Most hand-held lasers you're probably familiar with fall into this visible range. The brightest color of human eyes is 532nm green light. For this reason, at the same output power, the green laser will be five to seven times brighter than any other color laser. As a result, the 200mW green 532nm laser designator will be 7 times brighter than the 200mW 405nm purple laser and about 5 times brighter than the red or blue laser.
