The purpose of fiber laser marking machine is to bring higher laser pointer production efficiency to enterprises. Create higher value, then how to increase the marking speed of fiber laser marking machine. Next, I will introduce it to everyone.
1. Influencing factors. The main factors of fiber laser marking machine are divided into internal factors and processing factors. The internal factors are mainly laser frequency, laser spot pattern and beam divergence angle, laser power, reasonable optical shaping, and auxiliary gas materials during processing. The internal factors are mainly paid attention to in the early model selection, and should be purchased according to the advice of the laser engineer. Another factor mainly needs to be paid attention to by the customer during processing, mainly the marking density, marking format, marking depth and laser spot size.
2. Marking density. In the case of the same format, the same spot, and the same depth, the higher the marking density, the slower the corresponding marking speed, because the density directly increases the marking area.
3. Marking format. Because the deflection area of the large-format marking galvanometer is increased, the marking speed of the large-format marking is slower than that of the small-format marking.
4. Marking depth. According to the requirements of the green laser pointer, if the depth of the marking needs to be deepened, the parameters of the fiber laser marking machine need to be adjusted to increase the power, current and other factors of the fiber laser marking machine, so the marking will be affected in these processes speed.
5. The size of the laser spot. The smaller the light spot, the smaller the marking volume, therefore. The larger the light spot, the faster the marking speed.