Laser Cutting And Engraving Machine
In general, 3D imaging technology uses graphics to obtain 3D images. It is necessary to project a high-brightness laser to measure an object. The distance and distance of the laser beam are used to process the image and model of the object. The entire process of the laser cutting and Engraving Machine is very complicated. It takes multiple shots to obtain a 3D image of the object, which is expensive and slow, especially not suitable for capturing images of moving objects. The whole process sometimes takes tens of minutes, and the object cannot move during shooting. This means that this photography technique can only be applied to landscapes and stationary objects. Later people invented 3DFlash! Photographic technology. The laser engraver technology has absolute advantages in photographing the human body-it can obtain high resolution in 0.01 seconds and obtain accurate three-dimensional data of the human face.
3DFlash! The three-dimensional flash can be connected with a common two-dimensional digital camera to project a special raster code onto the surface of the object, and the digital camera captures the coded image. Through special decoding software, analyze the encoded image to find the 3D information of the X, Y, and Z axes of the image. At this step, the portrait processed by the Laser Cutting And Engraving Machine is a 3D network portrait composed of a grid. One step is to apply skin and color to the face. After completion, a complete 360-degree 3D avatar was created on the computer. The computer then enters the information into the internal carving machine, and the perfect internal carving handicraft can be made.