Laser Engraving Las Vegas
Maintenance of the guide rail: During the movement of the guide rail, a large amount of dust is generated due to the processed material. Maintenance method: First wipe off the original lubricant and dust on the Laser Engraving Las Vegas rail with cotton cloth. After cleaning, apply a layer of lubricant on the surface and sides of the rail. Maintenance cycle: about a week. Fan maintenance: After the laser engraver fan works for a period of time, a large amount of dust will accumulate in the fan and the exhaust pipe. The dust will affect the exhaust efficiency of the fan, causing a large amount of smoke and dust to be discharged. Maintenance method: loosen the connection hose of the exhaust pipe and the fan, remove the exhaust pipe, and clean out the dust in the exhaust pipe and the fan. Maintenance cycle: about one month.
$499.00 $499.00
$1,257.09 $1,257.09
$238.69 $89.99
Fastening of screws: After the motion system works for a certain period of time, the screws at the joints of the motion will become loose. After the screws are loose, the stability of the mechanical movement will be affected. Maintenance method: Fasten the screws one by one with the tools provided. Maintenance cycle: about one month. Lens maintenance: After the machine works for a period of time, the lens will be coated with a layer of gray due to the working environment. This will reduce the reflectivity of the reflective lens and the transmittance of the lens, and ultimately affect the working power of Laser Engraving Las Vegas. Maintenance method: Wipe the lens surface clockwise with an absorbent cotton dipped in ethanol to wipe off the dust. In short, we should always do the precautions of laser engraving machine, so that the life and working efficiency of our machine can be greatly improved.