Free Gifts For Orders Greater Than $100 - Green Laser Pointer

Active Popular Newest

Can Be Commercialized Quickly Green Laser Pointer

6.6K

0

The research team has conducted preliminary tests on their green laser pointer detection system. The researchers say that compared to existing methods for monitoring natural gas. This system has significant advantages. Explained: "Our system's monitoring is automatic, enabling continuous monitoring of a certain area. Importantly, the system is also sensitive to small changes in the concentration of methane and water vapor. It added:" Because the storm , Methane in the air will be diluted by water vapor. Therefore, the change in methane concentration in small leaks may be the same as that in humid environments. Laser frequency comb spectroscopy allows us to accurately measure water vapor and methane simultaneously. This allows us to correct the moisture in the air. This is essential for green laser pointers to detect small increases in methane content over a wide range.
 

Tags

System

6.6K

0

University of Colorado researchers plan to conduct two field green laser pointer tests. First test: located one kilometer away from the laser source. A small, real-time change in methane leakage was simulated. The system detected a leak of 1.6-8 grams of methane per minute. This methane is released at a rate comparable to the rate at which humans exhale air during normal breathing. Second test: Establish a beam network that can monitor a natural gas production site with five potential leak points. Similarly, the system not only accurately detected two simulated leaks. They are also pinpointed. After successful testing, the team hopes that this green laser pointer system can be commercialized soon.

This is an important part of making full use of the new laser. The duty cycle represents the amount of time that a single laser can remain on at one time. For example, if the duty cycle is listed as 90 seconds, you don't want to keep the laser on for a long time. It is safe to keep cooling for a few seconds to maintain the integrity of the diode. If the device you are looking at lists CW (continuous wave), it means that the laser is designed to maintain a longer power, so a few minutes is enough. However, the burning laser will generate a lot of heat, so it is recommended to limit this heat and properly cool the air in the equipment.

2020-01-17 02:24:50

Your Answer: