Laser positioning flashlight

It is well known that there are many kinds of laser flashlights on the market, but existing laser flashlights need to be connected by wire, forming a loop between the switch, LED lights and laser emitter. This connection method is not only complex in structure, but also inconvenient to install. The wiring in the flashlight will be very messy, causing a lot of inconvenience to the manufacturer in the assembly process, and the wire connection is easy to fall, which will cause poor contact and affect the life of the flashlight. Existing laser flashlights are difficult to install, requiring another baffle to hold the LED lamp and circuit board, which is not only wasteful, but also complicated. At the same time, the existing laser flashlight needs to fix the laser emitter with the laser fixing bracket, and the switch filler is fixed on the inner wall of the shell. Above, the LED mounting bracket is used to fix the circuit board and LED lamp composition, which requires many additional processes in the assembly and production process. Multiple supports require multiple abrasive tools to manufacture, and manual calibration is required when installing switches. Switch hole increases labor cost and low production efficiency.