The use of laser pointer labels is good or bad

Laser labels are difficult to produce on press

Label stock suppliers understand the amount of water required for laser control to address such issues as crimping and pressing. You can swipe across the astronomical laser pointer screen to emphasize briefings. Whether the crimping occurs on an 81/2" or 11" stamped part, manufacturers will find it difficult to fix the problem. Binders are another factor. "If it's too thin, too soft, it rolls on the item, so it's very expensive to fix, and unless the cutting edge is aligned, the dust can weigh heavily on the item inside the drum," Heinl said.

It is understood that my country's current green laser pointer 2000mw is divided into four categories about the danger. The output power is less than 0.4mw, two are between 0.4mw and 1mw, three are between 1-500mw, and four are more than 500mw. If the output power exceeds 0.4mW, the eyes should not be in direct contact. If the output power of the three is large, it is easy to cause damage to the human eye, and the power will cause blindness. According to reports, laser fusion research is a promising energy development topic, and the laser-controlled nuclear fusion reaction will surely bring a new turning point to human life. Laser fusion research is also of great military significance. In laser fusion experiments, especially in indirect-driven fusion research, a strong radiation-driven market has emerged, and people are mostly in the fields of high X-ray conversion efficiency, good radiation transmission environment, and radiation-driven fields. During these studies, the energy of the excimer laser is very important for direct monitoring and research. The results of the study show that the research and development of this project not only develops the strength of the product and continuously develops the market, but also has the commitment and development capability to develop applications according to the needs of the project.

2022-02-10 10:56:32